Let us run your production side, so you can stay focused on relationships, systems, and growing the business. You know the headaches — crews that don't show, schedules that slip, messy jobsites, poor communication, and callbacks that cost you your reputation with the homeowner. We show up, we communicate, and we finish clean and on schedule, treating your customer like they're our own, because on that job your name is on the line and we protect it like it's ours. We're looking for long-term relationships, not one-off jobs — a reliable production partner you can count on, job after job.
One standard across every job: prepped right, installed clean and straight, protected like our own property, and finished to the last corner. Tap a row to start a quote.
Running a different scope? If it touches the exterior, call (405) 331-5427 and talk it through with the crew directly.
/02 — The details
The detail is the difference
Scroll through recent work up close. Every photo is ours, shot on site — and each one names the detail we'd want you to check first.
Dutch double vinyl siding over full prep — A-frame front elevation.
The Profile — Dutch Double Vinyl Siding
A shadow line on every course
Dutch double vinyl siding carries a beveled edge on each panel, so every course throws its own deep shadow line up the wall. It's the profile that makes a finished wall read rich instead of flat — but only if every course runs dead level. On a steep A-frame gable like this one, there's nowhere for a wandering course to hide.
Two full courses per panel — fewer seams up the wall
Courses kept level from corner to corner
Shadow lines even, top of the wall to the foundation
Insulation board up, every seam taped — the same A-frame wall, before the panels.
The Prep
Flat and sealed before panel one
The finish is only as good as what's underneath it. Before a single panel goes up, the wall gets leveled with insulation board and every seam gets taped — a flat, sealed substrate that keeps the siding lying true and the weather where it belongs: outside.
Insulation board fastened flat, no waves to telegraph through
Every seam taped — no gaps left behind the panels
Openings wrapped and ready before trim goes on
Red siding, white trim — front elevation, with the gutter and downspout run at the corner.
Steep Geometry
Straight lines on a wall that fights back
An A-frame narrows as it climbs, so every course has to be cut and set with the rake in mind — rush it and the lines start to drift where the wall meets the roof. Here they hold level all the way up, the white trim edges the rake clean, and even the white gutter and downspout run plumb down the corner, elbowed tidy at the deck.
Courses level from the eave to the peak
White trim crisp along the rake
Gutter & downspout plumb at the corner
Gable end — straight courses, crisp white corners.
Trim & Corners
White trim, cut crisp
Stand square in front of a gable end and the truth shows: courses either run true or they don't, and corners either meet clean or they get buried in caulk. Ours meet clean. The white corner trim stands plumb against the red panels, and the small gable windows are wrapped tight on all four sides.
Corner boards straight and plumb
Trim meets the panels with no gaps to fill
Small windows wrapped tight, not worked around
Entry elevation — door and window surrounds finished tight.
The Entry
The doorway sets the standard
The front door is where a homeowner looks closest, so it's where we do too. The surround is trimmed square and sealed, the big front window is cased tight on all four sides, and the courses run level straight past both openings — no dips, no jogs where the panels meet the trim.
Door surround square, sealed, and clean
Window casing tight on all four sides
Courses level straight past every opening
Back elevation — the same finish where nobody's watching.
Around the Back
Same finish where nobody's watching
Plenty of crews relax on the back wall. We don't — a contractor walks the whole house, and so do we. The storm door is framed and trimmed as clean as the front, the courses run level along the long wall, and the starter course sits straight at the foundation.
Storm door framed and trimmed clean
Long wall courses level end to end
Starter course straight at the foundation line
Finished roof up close — valley and ridge lines.
Valleys & Ridge
Valleys cut clean, ridge run true
Where two slopes meet, sloppy cuts show from the street. These valleys are cut in a straight, clean line and the ridge cap runs even from end to end, with the warm multi-tone blend staying consistent across the whole slope — no patch that reads like a patch.
Valley lines straight, no wandering cuts
Ridge cap even, end to end
Color blend consistent across the slope
A valley meeting two pipe boots and a vent — every penetration flashed clean.
Flashing & Vents
Penetrations finished neat
Most leaks start where something pokes through the roof, so that's where the care goes. Pipe boots are flashed and sealed, the vent sits square with shingles cut tight around it, and the valley carries water past all of it without a single ragged edge.
Pipe boots flashed and sealed
Vent set square, shingles cut tight around it
No ragged cuts left at the valley
The full slope — straight courses across the whole field.
The Field
Courses straight enough to sight down
Step back and sight down a finished slope: the exposure lines should read like graph paper. Ours do. Exposure stays even course after course, joints are staggered so nothing stacks, and every edge finishes clean where the slope meets the next roof line.
Exposure even, course after course
Joints staggered — never stacked
Edges finished clean at every roof line
Roof and gutters on a brick home — the eave line, front view.
Roof to Gutter
Where the roof hands off to the gutter
A roof isn't finished at the last shingle — it's finished where the water leaves. The shingle edge closes clean into the eave, the black gutter run holds one straight line under it, and the downspout drops tidy at the corner instead of wandering down the face of the house.
Clean roof-to-gutter transition at the eave
Gutter run straight, no sag between hangers
Downspout placed tidy at the corner
Same house, back side — hip lines, gutter corner, downspout to grade.
Around the Back
Hip lines carried through, water carried down
Around the back, the hip lines meet even where the slopes come together, the gutter turns the corner tight with no dip or gap, and the downspout runs plumb from the eave straight to grade — the same standard on the side of the house nobody photographs.
Hip lines even where the slopes meet
Gutter corner tight, run holding its line
Downspout plumb, straight to grade
The Details — Up Close
Run your eye down the list
Hover a line — or tap it — to see the detail on a real job. This is the checklist we walk before we call anything finished.
/01
A shadow line on every course
+Dutch Double · Gable End
/02
Valleys cut clean, ridge run true
+Valley & Ridge · Finished Roof
/03
Penetrations finished neat
+Pipe Boots & Vent · Flashed Clean
/04
Straight enough to sight down
+The Full Slope · Even Exposure
/05
Crisp corners, plumb trim
+Entry Surround · Trimmed Tight
/06
The roof hands off to the gutter
+Eave Line · Straight Gutter Run
/03 — For contractors
Built to make you look good
We're a crew looking to stay busy — and we know exactly whose name is on the line when we're on your job.
"Our whole mission is to make the install as easy as possible for you — and to make you look good in front of your customer. Give us one job as a trial. We'll earn the rest."
When you call MP Exterior Dynamics, you talk straight to the crew doing the work — not a call center, not a salesman. An English-speaking lead is on site, every site, every day, so your customer always has someone to talk to and you always have someone who answers.
No long commitments up front. Put us on one roof or one wrap and judge the work yourself.
02
English-speaking lead, always on site
Clear communication with you and your homeowner — no guessing, no crossed wires, no surprises.
03
We protect the property
Landscaping, siding, windows, driveways — we cover and protect whatever needs it, and leave the site cleaner than we found it.
04
Finished to the last detail
Corners checked, seams checked, lines sighted from the street. If a detail isn't right, we fix it before we call the job done — not after you find it.
01
Send the scope
Plans, measurements, or just an address — we'll walk it with you and flag anything before it becomes a problem.
02
Get a straight price
Clear per-square or per-unit labor pricing up front. No vague numbers, no mid-job surprises.
03
We show up & install
Crew on site when promised, property protected, lead on site, photo updates as the work moves.
04
Clean finish
Magnet sweep, tidy site, walkthrough-ready work — the kind that gets you the referral, not the callback.
/04 — Recent work
Recent work
Drag the slider on each photo to compare before and after. This is our own work — shot on site, start to finish.
A-Frame Full Exterior — Dutch Double Vinyl Siding
A steep A-frame wrapped from bare insulation board to finished siding. The old exterior came off, the walls were prepped and sealed, and new Dutch lap vinyl went up with crisp white trim, new gutters, and clean lines around every roof-to-wall junction — the hardest part of an A-frame, and where cheap installs show first.
Full tear-off of the existing exterior
Insulation board with taped seams for a sealed, flat substrate
Dutch double vinyl siding, white corner & window trim
New gutters and downspouts, color-matched trim work
BeforeAfter
Front elevationBare insulation board to finished Dutch lap — trim, gutters, and all.
BeforeAfter
Side elevationLong wall and gable end — straight courses, tight corners.
BeforeAfter
Back elevationEntry wall finished clean around the door and roof junction.
Own or manage commercial property?
We'll inspect your roof and hand you a straight health report — what's solid, what's wearing, what to plan for — at no charge and no obligation. It's how we introduce ourselves to property owners and managers across Oklahoma.
Free Roof Inspection & Health Report
Full walk of the roof with photos
Condition report on membrane, flashing & drainage
Honest timeline: what needs attention now vs. later
Tell us about your project and we'll get back to you. No pressure, no obligation — just a straight conversation about the work.
Ridge run trueCourses even across the slopeStraight gutter run at the eaveDownspout tidy at the corner
The Finished Standard
Finished to the last detail
One of our roof and gutter installs, shot on site. Sight down the ridge, follow the gutter run, check the downspout — that's the finish your name rides on when MP is on your job.
BeforeAfter
BeforeAfter